Radioactive Materials - Monthly Surveys

Monthly surveys are not required when there is no radioactive material in your inventory (including in storage and in waste) for the entire calendar month.

Or

The approval has been given a special condition from the Radiation Safety Committee(s).

There is no set number of areas required to be surveyed, but you must ensure that all radioactive material use areas within the lab are covered.

Survey records must be maintained for three years after the date of the survey.

There are no specific requirements for where survey records must be maintained.  Survey records must be readily available for inspection by Research Laboratory & Safety Services or outside regulatory agencies.

The area must be immediately decontaminated and a documented follow-up survey must be performed to show  that contamination does not exceed the action level.

The action level for contamination is 50 counts per minute (cpm) above the background count rate.

• Perform a survey immediately .
• Inform the Approval Holder or Approval Safety Coordinator that a survey was missed.

All surveys (both monthly and after-use) must include:

• Date survey was performed
• Initials of the surveyor
• A background count or count rate
• Location(s) surveyed
• Results for each location
• Follow-up survey results, if necessary

The method depends on what radionuclide(s) your approval is approved to possess and use:

• Approvals approved for low energy beta emitters (such as C-14, S-35 and H-3 ) must use a liquid scintillation counter.
• Approvals approved for high energy beta emitters (such as P-32) can use a pancake probe Geiger counter.
• Approvals approved for low energy gammas emitters (such as I-125 or Cr-51) can use a low energy gamma scintillation probe.
• Wipes surveys with a liquid scintillation counter can substitute for portable instrument surveys.

• All areas where radioactive material is used or stored
• Commonly touched items, such as light switches, RAM storage area exterior surfaces, telephones, tools, equipment controls, door handles, or computer keyboards/mice
• Commonly travelled floor areas such as entrances or exits and the floor near RAM use areas, waste storage locations and frequently used equipment